DVB-T2/HEVC – June 27, the last stage of transition to the new TV standard. In which regions? [LISTA]

On Monday, June 27, the fourth and final stage of introducing DVB-T2/HEVC in Poland will begin. The change will apply to the following voivodeships: Lubelskie, Mazowieckie, Podlaskie and Warmińsko-Mazurskie. Thus, the entire area of ​​the country will already be covered by the new digital terrestrial broadcasting standard.

More information from Poland can be found on the main page

Terrestrial television in a new standard. How to check if the TV receives DVB-T2?

Most new TVs support . For older receivers, you will need to replace your TV or purchase a TV to use the new standard. If you want to make sure that your equipment can receive DVB-T2, you can do it in two ways:

• enter the model of your TV into the search engine on the website;
• use the Check TV channel available on channel 28.

We remind you – the government offers subsidies for the replacement of equipment for DVB-T2: PLN 100 for a decoder and PLN 250 for a new TV set. More details in the article below:

How to configure the DVB-T2 set-top box? [INSTRUKCJA]

First, the decoder must be connected to the power supply, and then we connect the decoder to the TV with an HDMI cable. When we have done these steps, we move on to connecting the cable from the DVB-T / T2 antenna to the RF IN input on the set-top box. Then plug the decoder into the socket. Then you need to turn on the decoder and use the TV remote control to switch the signal source to the correct HDMI or SCART connector. Then the decoder menu should appear on the screen – then you need to set e.g. country, language and time, then go to automatic channel search.

How to setup on the TV?

First, connect the antenna cable to the TV and then turn it on. “If the TV is turned on for the first time, the default settings will appear automatically. Follow the on-screen steps to set up the TV,” reads the ministry’s manual.

Help Ukraine, join the collection. You will pay the money on the website