How to properly clean the toilet and stop breathing in germs

The toilet cleaning is one of the routines that we should not overlook every day, because germs and bacteria accumulate in the toilet harmful to our health. The toilets must be disinfected dailyin this way we will avoid bad odors and the accumulation of dirt in the bottom.

And an important topic: when flushing, if you don’t lower the lidthousands of germs and bacteria that are in the toilet water spread throughout the environment and surfaces, such as the toothbrush if it is there and they are inhaled for whoever is present. This is disgusting and the possible start of some infection or disease. In this article we review the best ways to disinfect the toilet and clean the bottom. It will be like new!

Clean the bottom of the toilet

1. Lemon and white vinegar. This combination has a known power disinfectant. The natural acids in both ingredients easily break down limescale deposits and bathroom grime buildup. In addition, it eliminates microorganisms that cause diseases. In a container, pour half a cup of white vinegar (about 125 ml) and the juice of one lemon. Pour the mixture and rub vigorously on the areas you want to clean. Depending on the type of stain, you can use an abrasive sponge or sandpaper. Moisten it with a little water to facilitate your work well.

2. Bicarbonate and hydrogen peroxide. In addition to cleaning all surfaces, they leave brightness. Put half a cup of baking soda in a container and two tablespoons of hydrogen peroxide. Moisten the baking soda well with hydrogen peroxide and use the paste obtained to clean the stains with an abrasive cloth or sponge, depending on your needs. Leave on for 20 minutes and remove. You can add the juice of a lemon to achieve a more powerful whitening effect, but this is optional.

3. Baking soda and vinegar. Pour a cup of vinegar over the entire surface of the toilet. Clean it and make sure all the walls are covered with the vinegar. Let it sit for a few minutes while you wipe down the outside of the toilet with a mixture of water, vinegar, and lemon peel to thoroughly scent and disinfect the outside surface and lid. When a few minutes have passed, sprinkle a cup of baking soda all over the toilet and start clean it with a strong bristle brush, or with the toilet brush with which you usually clean. After applying the bicarbonate, you will notice that a foam with which you can clean the toilet more effectively. Let it rest again and pull the chain to remove what is left.

4. Fluoride toothpaste. Did you know that toothpaste is antibacterial? If you put it in the toilet tank, every time you flush the chain, the accumulated bacteria will be automatically eliminated. In addition, this trick lasts three months and if the paste contains fluoride then you will not have to worry about tartar or yellow stains that may occur on the walls of the toilet. Another benefit is that the toothpaste will leave a refreshing smell in the bathroom.

To apply it, short both corner the toothpaste tube, one shorter than the other. With a pin Make holes in the container on both sides. This will mean that when you flush the chain, only a small amount of toothpaste comes out of the bottle, enough to keep the toilet disinfected and scented. You may notice a bit of foam, but this is normal, so don’t freak out when you see it!

We hope that these tips will be useful to you and that you always lower the lid of the toilet, especially before flushing the chain in a public service. You know, it’s for your own good.