You just found the ring of your dreams, the perfect one for yourself or to give as a gift, but you don’t know what size you should buy. How do you measure the size of a ring?!
It may be something you have never considered, but yes, the rings have their own size. And it happens as with clothing and footwear, that in Spain there is a standard size that has its equivalents in European, Asian and American measurements.
In Spain, the most common sizes range from 8 to 30, for men and women, according to Marjoya.com. Each number corresponds to a specific diameter. The smallest size, 8, corresponds to a diameter of 15.2mm, and the largest, 30, corresponds to a diameter of 22.30mm.
To start, let’s look at the methods to measure ring size.
1. Measure the size of the ring with a tape measure
Wrap the tape measure around your finger to form a circle. Make sure that the circle you just made as a ring passes well over the knuckle and that it fits comfortably. Write down the measurements in millimeters and use a measurement guide or the comparison table that you can find online to determine the size of the ring.
2. Measure the inner circumference of the ring
It is about knowing the size of the ring by measuring the inner circumference of a ring that fits the person whose size we want to know. The procedure is very simple. Put the ring in question on a ruler or measure it with a meter stick to see the millimeters of the inside diameter. Then go to the size chart to find the one that fits.
3. Measure the finger to know the size of the ring
Among the few really important things in this procedure is that you do the measurement at the end of the day, because the fingers change in size throughout the day due to dilation, heat, etc. Measure the circumference of the finger you are going to put the ring on with a flexible sewing meter. If you don’t have one, you can cut a strip of paper and make a mark and then measure on a ruler or meter stick. Once we know the size of the finger in centimeters, look at the equivalence table to find out your ring size.
Tricks to not fail with the ring size
one. Measure your ring size at the end of the day. The size of the finger varies depending on the time of day and the weather. Also, the fingers of the dominant hand are usually larger. That is, the same finger can have a different ring size on the left hand and on the right.
two. Measure three to four times to reduce the chance of error.
3. If it is the case that the knuckle is larger than the base of the finger, measure both choose an intermediate ring size.
Four. If the ring is between two sizes, order the larger size
Finally, there is another extra safe option but in which you will need the help of a jeweler. Approach any jewelry with a ring and there with a measuring stick They will be able to tell you without a doubt what size the ring is and the person wearing it.
Source: Lasexta
Paul is a talented author and journalist with a passion for entertainment and general news. He currently works as a writer at the 247 News Agency, where he has established herself as a respected voice in the industry.
